P4479 Liquid U/G Medium

Please select from the options above.
Liquid underglaze medium.
Water based, easily mixed and quick drying gum based medium for general use.
Does not need hardening.
Tips for on-glaze painting:
Cadmium reds and yellow:
These warm colours needto be applied more thickly and fired at a
slightly lower temperature, to 790C (maximum), with little or no soak.
This method is most relevant to P4288 Golden Yellow.
Transparent colours:
Any on-glaze or glass paint can be made transparent by the addition of clear flux.
Products available from Potterycrafts are:
R5925 - Mixing flux for low sol colours
R5926 - Mixing flux for low sol colours, suitable for use with cadmium
R5625 - Mixing flux for leadless colours. This flux can also be used as a protective layer overon-glaze decoration to give extra durability.
Outlines for designs can be traced or drawn free hand using a soft pencil or fine marker pen. For a more permanent result, a pale brown or grey on-glaze colour can be used with a fine brush or pen.This can then be
fired to give an outline which will not be lost after the first firing.
Outlines are best done on ware that has been de-greased with turpentine
and dried.

On-glaze colours can be matted down with the addition of a matting agent such as zinc oxide. This should be mixed at approximately two parts colour to one part matting agent.
Metals and lustres:
When working with any metals or lustres, we recommend you use a brush dedicated to those products. Do not wash your brush with soap and water, as this may cause faults on your next application. Rinse used brushes in the appropriate essenceand then wrap the bristle in aluminium foil. If necessary, soften your brush with essence before working.
For details of brushes available from Potterycrafts, please refer to our
tools, sponges and brush section.
LEADED - (low sol) based on lead frits
LEADLESS - may contain up to 0.5% of lead (usually from the stain
manufacturer), not enough to give lead release
LEADFREE - contains no lead whatsoever
Remember in all cases it is your responsibility to have the finished ware tested by a competent organisation.

There are no downloads for this product.

There are no reviews for this product yet. Be the first to add one!