P5910/A Fireworker-ECO 50lt 3kW (13A) 1200°C
Firing capacity: 50 litres (1.77 cu ft).
Maximum Temperature: 1200°C
Chamber dimensions: 400mm wide x380mm deep x 350mm high (15” x 15” x 13”).
External dimensions: 630mm wide x 737mm deep x 760mm high (24” x 29” x30”)
Power: 3.0 kW
Supply required: Single Phase - 13 amps
Kiln Shelf size: 360 x 360 x 13mm See P5482 1 batt per layer
Kiln Furniture Set: See P5810 for details and price
Kiln Stand Accessory: See P5911SF for details and price
Standard Controller : TC3300-1 (1-program memory each with 2 segments)
You can upgrade to CERA-2 (2-program memory each with 3 segments), CERA-5 (5-program memory each with 5 segments) , CERA-10 (10-program memory each with 10 segments) or CERA-10+ (10 -program memory each with 16 segments) for marginal extra cost, select your choice from the drop down box above:Information Link: Kiln Safety & Ventilation pages
Information Link: Guide to Programming Your Kiln in PDF format
Type "R" thermocouples fitted as standard on UK kilns.
The P5910/A is a small bench mounted kiln designed for test firing clays and glazes without having to fire a large kiln.
These kilns are constructed of a low thermal mass insulation brick with a high grade backup insulation board this is all enclosed within a high quality pressed steel powder coated frame.
Kanthal A1 spiral wound elements are used to heat the kiln, the elements are located in grooves within the side walls of the kiln to allow uniform heat distribution throughout the chamber
All Genesis kilns are CE marked and have captive key interlocks fitted to break full load upon opening the kiln to comply with both UK and European legislation, in addition to this all Potterycrafts Genesis kilns are now fitted with two contactors as standard togive greater protection against possible over-fires, when used in conjunction with our range of microprocessorcontrollers.
Brick to brick door seal, no messy fibre.
- Adjustable clasp door lock fitted.
- All kilnsare fitted with a Harting socket for easy controller connection.
- Roof bung hole and plug as standard to assist with venting of the kiln and cooling.
- Self assembly kiln stand option available with built in shelf.
- Furniture set available
This kiln is made to order please call for delivery times.
Standard Pallet delivery by tail lift vehicle is to ground level to your driveway or kerbside; please ensure that you consider how you will move the kiln to its required operating position.
Option 1 - We can arrange to deliver directly from our factory and position the kiln where required at competitive prices.
Option 2 - We can offer a connection and set-up service in addition to Option 1.
Please email email@example.com and we will send you a Kiln Questionnaire to complete, or call us on 01782 745000 to discuss, we will then be able to quote accurately for these Options.
If you have restricted access we may be
There are no downloads for this product.