P5237-5SE CeramasterPLUS 1020lt 55kW (3ph) 1320°C
Firing capacity: 1020 litres (37 cu ft).
Maximum Temperature: 1320°C (Cone 11)
Chamber dimensions: 820mm wide x 965mm deep x 1290mm high (32” x 39½” x 50½”).
External dimensions: 1230mm wide x 1670mm deep x 2230mm high (49” x 65½” x 87½”)
Supply required: 3 phase-100 amps per phase
Kiln Furniture Set: See P5846 for details and price
Controller included: CERA-5(5-program memory each with 5 segments)
You can upgrade to CERA-10 or CERA-10+ for marginal extra cost.
Additional Safety Equipment available for kilns(Links Below):Heatlock; PFL HeatlockAuto-damper; PFL/ADKiln Safety & Ventilation pagesInformation Link : Guide to programming your kiln.
The CeramasterPLUS Range offer the Ceramaster quality and performance with elements on 5 sides of the kiln.
Constructed from low thermal mass insulation brick with two high grade backup insulation boards, the roof is a traditional curved arch construction again with two layers of backup insulation, enclosed within a 2mm zintec steel powder coated frame.
Graded Kanthal A1 Heating Elements are supported on ceramic tubes, positioned in the floor and two side walls, back wall and door.
Dual contactors provide security against over-fires, when used in conjunction with Potterycrafts Kiln controllers.
Block construction flat arched roof for greater strength and durability.
Designed for repeated high temperature firings to 1320°C (cone 11).
Three year warranty (excluding wear parts) back-up from our staff and a network of independent service engineers.
Technical staff available for advice on all aspects of using your kiln.
Made in Britain at our factory in Stoke-on-Trent where our skilled staff, call on over a hundred years accumulated knowledge of kiln building.
Type R thermocouples fitted as standard on UK kilns. Adjustable clasp door locks fitted. Brick to brick door seal, no messy fibre. All kilns are fitted with a Harting socket for easy controller connection Roof and door vent as standard for venting of the kiln during firing and to aid cooling. Standard left hand door hinges with option for right hand. 2 Zone controller option available on models P5232, P5233, P5234, P5236, P5236B, P5237 & P5238. Energy efficient.
This kiln is made to order please call for delivery times.
Standard Pallet delivery by tail lift vehicle is to ground level to your driveway or kerbside; please ensure that you consider how you will move the kiln to its required operating position.
There are no downloads for this product.