P5129 Heatmaster 240lt 16kW (3ph) 1300°C

Specifications:
Firing Capacity: 240ltr
Maximum User Temperature(highest temp the kiln goes too) 1300'c
Maximum Application Temperature (temperature upon repeated firing use for longevity): 1240'c
Chamber dimensions: 530mm wide x 680mm deep x 630mm high.
External dimensions: 1030mm wide x 1200mm deep x 1700mm high.
Weight: 750kgs
Power: 16.0 kW
Supply Required Single Phase (Amps): n/a
Supply Required 3 Phase (Amps): 20A
Kiln Furniture Set: See P5820 for details and price.
Controller: Choose from Cera-5 (5 program) or Cera-10+ at point of order
Warranty Period:2 years.
Additional accessories:
Automated Damper: PFL/AD
Heatlock: PFL/HL
Damper & Heatlock together: PFL/AD/HL
Key features

• Two layer efficient insulation comprising of the highest quality insulation brick and back up with the highest quality ceramic insulation board on the market.
• The roof is a traditional curved arch construction again with two layers of backup insulation, all encased in a steel powder coated frame.
• Brick to brick door seal, no messy fibre and flush fit for better heat retention.
• Kanthal A1 spiral wound elements are located in grooves within the side walls and the floor of the kiln to allow uniform heat distribution throughout the chamber.
• Door Spy Hole/vent and flue vent with manual damper as standard, automated damper can be added at extra cost.

Safety features:

• Dual contactors provide protection against over fires, when used with Potterycrafts Kiln controllers.
• Type R thermocouple for accuracy and longevity of use.
• Captive interlock safety switch, meaning the kiln will not turn on unless this is locked and in place.
• All Potterycrafts kilns are ROHS and WEEE compliant.
• For information about Installation, positioning and ventilation with your new kiln please see our support section of our website.

DELIVERY

This Kiln is made to order, please check out on our website when you are ready to purchase...

Front Loading Kilns are delivered by two delivery options.

Option 1 Standard Pallet delivery. The delivery is by tail lift vehicle is to ground level to your driveway or kerbside; please ensure that you consider how you will move the kiln to its required operating position.

Option 2 Delivery and positioning; our carrier will deliver the kiln and move it to its final operating position. For this service please email for our kiln delivery questionnaire, this will enable us to quote for the delivery if it is possible for your location, please note this is available for UK mainland customers' only.

Potterycrafts do not offer a connection service, for a list of kiln engineers who offer this service please see our support section of the website.