P5229-5SE CeramasterPLUS 220lt 13kW(63A) 1320°C
Firing capacity: 220 litres (7.8 cu ft).
Maximum Temperature: 1320°C
Chamber dimensions: 610mm wide x 575mm deep x 630mm high
External dimensions: 1020mm wide x 1050mm deep x 1570mm high
Power: 13 kW
Supply required: Single Phase-63 amps or 3 phase-20 amps per phase
Kiln Furniture Set: See P5829 for details and price
Controller included: CERA-5(5-program memory each with 5 segments)
You can upgrade to CERA-10 or CERA-10+ for marginal extra cost.
Additional Safety Equipment available for kilns(Links Below):Ventilation Hood: KM207AHeatlock; PFL HeatlockAuto-damper; PFL/ADInformation Link : Guide to programming your kiln.
The CeramasterPLUS Range offer the Ceramaster quality and performance with elements on 5 sides of the kiln.
Constructed from low thermal mass insulation brick with two high grade backup insulation boards, the roof is a traditional curved arch construction again with two layers of backup insulation, enclosed within a 2mm zintec steel powder coated frame.
Graded Kanthal A1 Heating Elements are supported on ceramic tubes, positioned in the floor and two side walls, back wall and door.
Dual contactors provide security against over-fires, when used in conjunction with Potterycrafts Kiln controllers.
Block construction flat arched roof for greater strength and durability.
Designed for repeated high temperature firings to 1320°C (cone 11).
Three year warranty (excluding wear parts) back-up from our staff and a network of independent service engineers.
Technical staff available for advice on all aspects of using your kiln.
Made in Britain at our factory in Stoke-on-Trent where our skilled staff, call on over a hundred years accumulated knowledge of kiln building.
This kiln is made to order please call for delivery times.
Option 1 - Standard Pallet delivery is the cheapest option, the kiln is delivered to ground level at your driveway or kerbside only; please ensure that you consider how you will move the kiln to its final position..
Option 2 - Delivery and positioning; our carrier will deliver the kiln and move it to its final operating position. For this service please ask for our kiln delivery questionnaire, this will enable us to quote for the delivery.
There are no downloads for this product.