P5229 Ceramaster 235lt 13kW (63A) 1320°C
P5229 SPECIFICATIONS
Firing capacity: 235 litres (8.3 cu ft).
Maximum Temperature: 1320°C
Chamber dimensions: 610mm wide x 610mm deep x 630mm high
External dimensions: 1020mm wide x 1050mm deep x 1570mm high
Weight: 400kgs
Power: 13 kW
Supply required: Single Phase-63 amps or 3 phase-20 amps per phase
Kiln Furniture Set: See P5829 for details and price
Controller included: CERA-2(2-program memory each with 3 segments)
You can upgrade to CERA-5 , CERA-10 or CERA-10+ for marginal extra cost.
Additional Safety Equipment available for kilns(Links Below):Ventilation Hood: KM207AHeatlock; PFL HeatlockAuto-damper; PFL/AD
Information Link: Kiln Safety & Ventilation pages
Link: Guide to Programming Your Kiln
Key Features
Constructed from low thermal mass insulation brick with two high grade backup insulation boards, the roof is a traditional curved arch construction again with two layers of backup insulation, enclosed within a 2mm zintec steel powder coated frame.
Graded Kanthal A1 Heating Elements are supported on ceramic tubes, positioned in the floor and two side walls.
Dual contactors provide security against over-fires, when used in conjunction with Potterycrafts Kiln controllers.
Block construction flat arched roof for greater strength and durability.
Designed for repeated high temperature firings to 1320°C (cone 11).
Three year warranty (excluding wear parts) back-up from our staff and a network of independent service engineers.
Technical staff available for advice on all aspects of using your kiln.
Made in Britain at our factory in Stoke-on-Trent where our skilled staff, call on over a hundred years accumulated knowledge of kiln building.
This kiln is made to order please call for delivery times.
Option 1 - Standard Pallet delivery is the cheapest option, the kiln is delivered to ground level at your driveway or kerbside only; please ensure that you consider how you will move the kiln to its final position..
Option 2 - Delivery and positioning; our carrier will deliver the kiln and move it to its final operating position. For this service please ask for our kiln delivery questionnaire, this will enable us to quote for the delivery. Potterycrafts do not offer a connection service, for a list of kiln engineers who offer this service please contact us. Please emailsales@potterycrafts.co.uk and we will send you a",,,,,,,,,,,,,,,,,,,,,,,Front Loading Kilns,,,,,,,,,
NEW WEBSITE STRUCTURE,KILNS & ACCESSORIES,Front Loading Ceramaster 235 to 1200lt,,,,,,P5229 Ceramaster 235lt 13kW (63A) 1320°C,,P5229,"Ceramaster 235lt 13kW (63A) 1320°C & CERA-2 Controller",Y,""," Additional Safety Equipment available for kilns(Links Below):Ventilation Hood: KM207AHeatlock; PFL HeatlockAuto-damper; PFL/AD This kiln is made to order please call for delivery times. Option 1 - Standard Pallet delivery is the cheapest option, the kiln is delivered to ground level at your driveway or kerbside only; please ensure that you consider how you will move the kiln to its final position.. Option 2 - Delivery and positioning; our carrier will deliver the kiln and move it to its final operating position. For this service please ask for our kiln delivery questionnaire, this will enable us to quote for the delivery if it is possible for your location. Potterycrafts do not offer a connection service, for a list of kiln engineers who offer this service please contact us. Please emailsales@potterycrafts.co.uk and we will send you a Kiln Questionnaire to complete for delivery option 2, or call us on 01782 745000 to discuss.P5229 SPECIFICATIONS
Firing capacity: 235 litres (8.3 cu ft).
Maximum Temperature: 1320°C
Chamber dimensions: 610mm wide x 610mm deep x 630mm high
External dimensions: 1020mm wide x 1050mm deep x 1570mm high
Weight: 400kgs
Power: 13 kW
Supply required: Single Phase-63 amps or 3 phase-20 amps per phase
Kiln Furniture Set: See P5829 for details and price
Controller included: CERA-2(2-program memory each with 3 segments)
You can upgrade to CERA-5 , CERA-10 or CERA-10+ for marginal extra cost.
Information Link: Kiln Safety & Ventilation pages
Link: Guide to Programming Your Kiln Key Features
Constructed from low thermal mass insulation brick with two high grade backup insulation boards, the roof is a traditional curved arch construction again with two layers of backup insulation, enclosed within a 2mm zintec steel powder coated frame.
Graded Kanthal A1 Heating Elements are supported on ceramic tubes, positioned in the floor and two side walls.
Dual contactors provide security against over-fires, when used in conjunction with Potterycrafts Kiln controllers.
Block construction flat arched roof for greater strength and durability.
Designed for repeated high temperature firings to 1320°C (cone 11).
Three year warranty (excluding wear parts) back-up from our staff and a network of independent service engineers.
Technical staff available for advice on all aspects of using your kiln.
Made in Britain at our factory in Stoke-on-Trent where our skilled staff, call on over a hundred years accumulated knowledge of kiln building.DELIVERY
All kilns are subject to specification change at any time
There are no downloads for this product.
There are no reviews for this product yet. Be the first to add one!
Customers Also Bought

RODERVELD MAX 100 White Stainless Steel 1HP Wheel
£2,006.46 (inc VAT)