P5232-5SE CeramasterPLUS 415lt 22kW(3ph) 1320°C
P5232-5SEFiring capacity: 415 litres (15 cu ft).
Maximum Temperature: 1320°C (Cone 11)
Chamber dimensions: 610mm wide x 695mm deep x 980mm high
External dimensions: 1020mm wide x 1160mm deep x 1800mm high
Power: 22 kW
Supply required: 3 phase-45 amps per phase
Kiln Furniture Set: See P5835 for details and price
Controller included: CERA-5(5-program memory each with 5 segments)
You can upgrade to
Youcan upgrade to CERA-10 orCERA-10+ for marginal extra cost.
Additional Safety Equipment available for kilns(Links Below):Ventilation Hood: KM208Heatlock; PFL HeatlockAuto-damper; PFL/ADInformation Links : Guide to programming your kiln.
The CeramasterPLUS Range offer the Ceramaster quality and performance with elements on 5 sides of the kiln.
Constructed from low thermal mass insulation brick with two high grade backup insulation boards, the roof is a traditional curved arch construction again with two layers of backup insulation, enclosed within a 2mm zintec steel powder coated frame.
Graded Kanthal A1 Heating Elements are supported on ceramic tubes, positioned in the floor and two side walls, back wall and door.
Dual contactors provide security against over-fires, when used in conjunction with Potterycrafts Kiln controllers.
Block construction flat arched roof for greater strength and durability.
Designed for repeated high temperature firings to 1320°C (cone 11).
Three year warranty (excluding wear parts) back-up from our staff and a network of independent service engineers.
Technical staff available for advice on all aspects of using your kiln.
Made in Britain at our factory in Stoke-on-Trent where our skilled staff, call on over a hundred years accumulated knowledge of kiln building.
This kiln is made to order please call for delivery times.
Standard Pallet delivery by tail lift vehicle is to ground level to your driveway or kerbside; please ensure that you consider how you will move the kiln to its required operating position.
Option 1 - We can arrange to deliver directly from our factory and position the kiln where required, at competitive prices.
Option 2 - We can offer a connection and set-up service in addition to Option 1.
Please email email@example.com and we will send you a Kiln Questionnaire to complete, or call us on 01782 745000 to discuss, we will then be able to quote accur
There are no downloads for this product.