P59230 AURORA 40lt 1260°C Top Loading Kiln
Firing Capacity: 40 litres (1.4 cu/ft).
Maximum Temperature: 1260°C (Cone 8)
Chamber Dimensions: 400mm wide x 305mm deep
External Dimensions: 560mm wide x 710mm deep x 560mm high
Power: 3.0 kW
Supply Required Single Phase (Amps): 13A
Supply Required 3 Phase (Amps): N/A
Kiln Furniture Set Included: See P5838 for details included with this kiln.
Standard Controller : TC3300-1 (1-program memory each with 2 segments)
You can upgrade to CERA-2 (2-program memory each with 3 segments), CERA-5 (5-program memory each with 5 segments) , CERA-10 (10-program memory each with 10 segments) or CERA-10+ (10 -program memory each with 16 segments) for marginal extra cost, select your choice from the drop down box above:
Link: Kiln Safety & Ventilation pages
Link: Guide to Programming Your Kiln
The Potterycrafts Aurora is ideal for domestic situations and professional studios working on a small scale.
Kiln walls 63.5mm insulation brick plus 19mm backup insulation.
Stainless steel outer jacket
The kiln floor 65mm of super-efficient Ultralite granular insulation normally found in industrial kilns.
Three support bricks are located in the base to enable a shelf/batt to be placed above the insulation
Kiln lid 65mm insulation brick.
Kanthal A1 elements.
Fitted with 76mm castors for ease of movement.
Lid vent hole allows venting / cooling of the kiln during the firing process.
Side vent with chimney that can be ducted to atmosphere if required.
Captive interlock safety switch.
Dual contactors provide protection against over fires, when used with Potterycrafts Kiln controllers.
All Potterycrafts kilns are ROHS and WEEE compliant.
This kiln is made to order please call for delivery times..
Top Loading Kilns are generally delivered by Standard Pallet delivery. The delivery is by tail lift vehicle is to ground level to your driveway or kerbside; please ensure that you consider how you will move the kiln to its required operating position.
The kiln is secured to the pallet with straps, these can be cut with a pair of pliers. The kiln should then be eased off the pallet (check to ensure that the brake castors are free to rotate.), 2 people can lift the smaller kilns.
The kilns are then easily moved on the castors over paved surfaces, use boards if you have gravel or lawned areas to cross.
There are no downloads for this product.