P5945 Heatworker 230lt 13kW (60A) 1320°C
Firing capacity: 230 litres (8.1 cu ft).
Maximum Temperature: 1320°C (Cone 11)
Chamber dimensions mm: 420 wide x 610 deep x 885 high
External dimensions mm: 730 wide x 1090 deep x 1580 high
Power: 13.0 kW
Supply required: Single Phase-60 amps or 3 phase-20 amps per phase
Kiln Shelf size: 600 x 400 x 15mm See P5436 1 batt per layer
Kiln Furniture Set: See P5844/A for details and price
Standard Controller : <CERA-2 (2-program memory each with 3 segments) , CERA-5 (5-program memory each with 5 segments) , CERA-10 (10-program memory each with 10 segments) or CERA-10+ (10 -program memory each with 16 segments) for marginal extra cost, select your choice from the drop down box above:
Additional Safety Equipment available for kilns(Links Below):
Ventilation Hood: KM207
Heatlock; PFL Heatlock
Information Link : Guide to programming your kiln.
Graded heating elements are supported on ceramic tubes in the walls and floor for efficient use of electricity.
Constructed from low thermal mass insulation brick with high grade backup insulation boards.
Powder coated 2mm zintec steel frame with rust resistant stainless steel architrave above the door.
Brick to brick door seal, no messy fibre.
Standard left hand door hinges with cost option for right hand
Door Spy Hole/vent and roof vent with damper.
Over-fire protection in conjunction with Potterycrafts controllers.
Designed for repeated high temperature firings to 1320°C (cone 11).
Three year warranty (excluding wear parts)
Back-up from our staff and network of independent service engineers.
Technical advice available on all aspects of using your kiln.
Potterycrafts Kilns are Made in Stoke-on-Trent, our skilled staff can call on over a 100 years accumulated knowledge of kiln building.
This kiln is made to order please call for delivery times.
Standard Pallet delivery by tail lift vehicle is to ground level to your driveway or kerbside; please ensure that you consider how you will move the kiln to its required operating position.
Option 1 - We can arrange to deliver directly from our factory and position the kiln where required at competitive prices.
Option 2 - We can offer a connection and set-up service in addition to Option 1.
Please email firstname.lastname@example.org and we will send you a Kiln Questionnaire to complete, or call us on 01782 745000 to discuss, we will then be able to quote accurately for these Options.
If you have restricted access we may be able to build the kiln on site, please ask for details and a quotation.
There are no downloads for this product.