TC3300/1- 1 program 2 segment Kiln Controller

Stock Code: TC3300-1
9 In Stock for despatch
400.36£400.36 (inc VAT) per EACH
£333.63 (exc VAT)
Quantity: - +

TC3300/1 Controller 1 Program - 2 Segments

Description
Simple single program controller with Delay, 2 Ramps and 2 Dwells (ideal for firing simple ceramics).
C3300/1 features
Delay start facility - 0 - 99 hours 59 minutes.
Segment 1.
Heating Ramp 1 - 1 to 999°C per hour or FULL power to 'first set-point'.
Set-point 1 - 1 to 1300°C or to factory pre-set limit.
Soak Period / dwell - 0 to 99 hours 59 minutes.
Segment 2 - As segment 1 then End (Automatic switchoff).

Other features:-
Constant temperature readout.
Power usage indicator.
Program pause function.
Wall mounting.
Power interruption restart within100°C temperature fall.
Over temperature security contactor output.
Plug and go facility via Hartingplug.
Keyboard lockable.
Thermo couple Type - S,R,K orN (Standard factory preset UK to R type).
Range R/S -20to 1600°C °F - K/N 0 to 1300°C °F.
Resolution 1 Degree.
Accuracy +/- 0.1% FSD +/- 1digit.
Control Adaptive PID.
Supply 207-265 VAC - 50/60Hz-6VA max.
Output 230vAC.
Dimensions 120 x 190x 78mm.

CONTROLLER TERMINOLOGY
Delay start
A period of time to elapse before controller starts a firing,for example, in order to make use of off-peak power.
Heating/Cooling Ramp
The rate of heating up or cooling down, usually expressed in number ofdegrees per hour,e.g. 150°C per hour. A Kiln firing to 600°C at 150°C per hour would take 4 hours.
Set Point
Also called "Target temperature". The temperature at which the controller changes the ramp rate, startsto soak or switches off. For example a program might fire at 100°C per hour to the first set point of 600°C thenfireat 250°C per hour to top temperature of 1120°C.
Soak or Dwell
The periodof time that the kiln is held at a temperature in order to smooth out glazes or even out temperature in the kiln. Typically 15 to 20 minutes.
Segment
One part of the program, usually consisting of a ramp, a target temperature and asoak.
Event Relay
Output from a controller to operate an automatic damper, opening and closing it during the firing.


There are no downloads for this product.

There are no reviews for this product yet. Be the first to add one!