Thinners For P4254 Covercoat - 500ml

Stock Code: P4259.5
109 In Stock for despatch
26.11£26.11 (inc VAT) per EACH
£21.76 (exc VAT)
Quantity: - +

Thinners For P4254 Covercoat
Tips for on-glaze painting:
Cadmium reds and yellow:
Thesewarm colours need to be applied more thickly and fired at a
slightly lower temperature, to790C (maximum), with little or no soak.
This method is most relevant to P4288 Golden Yellow.
Transparent colours:
Any on-glaze or glass paint can be made transparent by the addition of
clear flux.
Products available from Potterycrafts are:
R5925 - Mixing flux for low sol colours
R5926 - Mixing flux for low sol colours, suitable foruse with cadmium
colours
R5625 - Mixing flux for leadless colours
R5930 - Mixing flux for glass colours(high temperature)
R5948-Mixing flux for glass colours (medium temperature)
These fluxes can also be usedasaprotective layer over on-glaze
decoration to give extra durability.
Outlines:
Outlines fordesigns can be traced or drawn free hand using a soft pencil
or fine marker pen. For a more permanent result, a palebrown or grey
on-glaze colourcan be used with a fine brush or pen. This can then be
fired to give an outline which will notbe lost after thefirst firing.
Outlines are best done on ware that has been de-greased withturpentine
and dried.
Matt colours:
On-glaze colours can be matted down with the additionof a matting
agent such as zinc oxide. This should bemixed at approximately two
parts colour to one part matting agent.
Metals and lustres:
When working with any metals or lustres,we recommend you use a
brush dedicated to those products. Do not wash yourbrush with soap
and water, as this may cause faults on your next application. Rinse used
brushes in the appropriate essence and then wrap the bristle in
aluminium foil. If necessary, soften your brush withessence before
working
.
For detailsof brushes available from Potterycrafts, please refer to our
tools, sponges and brush section.
ON-GLAZE COLOURS AVAILABLE FROM POTTERYCRAFTS
Potterycrafts on-glaze colours fall into 3 categories
LEADED - (low sol) based on lead frits
LEADLESS - maycontain up to 0.5% of lead (usually from the stain
manufacturer), not enoughto give lead release
LEADFREE - contains nolead whatsoever
Remember in all cases it is your responsibilityto have the finished ware tested by a competent organisation.

Size/Weight500ml
ManufacturerPotterycrafts
Product TypeCovercoat thinner

Click on any of the following links to download the file.

There are no reviews for this product yet. Be the first to add one!