Browse Potterycrafts

Energy Regulator For Enamel Kilns

Part No:
Item Price (GBP)
£139.21 (inc VAT) Each
Stock Availability
Please contact us for details.
Item Weight
1 Kilos
Energy Regulator For Enamel Kilns

Further Information

Click here to view our guide to programming your kiln in PDF format


Delay start
A period of time to elapse before controller starts a firing, for example, in order to make use of off-peak power.

Heating/Cooling Ramp
The rate of heating up or cooling down, usually expressed in number of degrees per hour, e.g. 150°C per hour. A Kiln firing to 600°C at 150°C per hour would take 4 hours.

Set Point
Also called "Target temperature". The temperature at which the controller changes the ramp rate,starts to soak or switches off. For example a program might fire at 100°C per hour to the first set point of 600°C then fire at 250°C per hour to top temperature of 1120°C.

Soak orDwell
The period of time that the kiln is held at a temperature in order to smooth out glazes or even out temperature in the kiln. Typically 15 to 20minutes.

One part of the program, usually consisting of a ramp, a target temperatureand a soak.

Event Relay
Output from a controller to operate an automatic damper, opening andclosing it during the firing.