TC3300/2- 10 program 4 segment Kiln Controller

Stock Code: TC3300-2
3 In Stock for despatch
547.93£547.93 (inc VAT) per EACH
£456.61 (exc VAT)
Quantity: - +

TC3300/2 Controller 10 Program - 4 Segments

Description
10 Program controller with Delay, 4 Ramps and 4 Dwells (ideal for firing most large or complexceramics where both heating and cooling speeds are required).
TC3300/2 features
Delay start facility - 0 - 99 hours 59 minutes.
Segment 1.
Heating Ramp 1 - 1 to 999°C per hour or FULL powerto 'first set-point'.
Set-point 1 - 1 to1300°C or to factory pre-set limit.
Soak Period / dwell- 0 to99hours 59 minutes.
Segment 2-4 - As segment 1 then End (Automatic switch off).

Other features:-
Constant temperature readout.
Power usage indicator.
Program pause function.
Wall mounting.
Power interruption restart within 100°C temperature fall.
Over temperature security contactor output.
Plug and go facility via Harting plug.
Keyboard lockable.
Thermo coupleType - S,R,K or N (Standard factory preset UK to R type).
Range R/S -20 to 1600°C °F - K/N 0 to1300°C °F.
Resolution 1 Degree.
Accuracy +/- 0.1% FSD +/- 1 digit.
Control Adaptive PID.
Supply 207-265 VAC- 50/60Hz - 6VA max.
Output 230v AC.
Dimensions 120x 190x 78mm.

CONTROLLER TERMINOLOGY
Delay start
A period of time to elapse before controller starts a firing, for example, in order to make use of off-peak power.
Heating/Cooling Ramp
The rate of heating up or cooling down, usually expressed in number of degrees per hour, e.g. 150°C per hour. A kiln firing to 600°C at 150°C per hour would take 4 hours.
Set Point
Also called "Target temperature". The temperature at which the controller changes the ramp rate, starts to soak or switches off.For example a program might fire at 100°C per hour to the first set point of 600°C then fire at 250°C per hour to top temperature of 1120°C.
Soak or Dwell
The period of time that the kiln is held at a temperature in order to smooth out glazes or even out temperature in the kiln.Typically 15 to 20 minutes.
Segment
One part of the program, usually consisting of a ramp, a target temperature and a soak.
Event Relay
Output from a controller to operate an automatic damper, opening and closing it during the firing.


There are no downloads for this product.

There are no reviews for this product yet. Be the first to add one!