P5901/A Genesis-ECO 40lt 1260°C
Firing capacity: 40 litres (1.41 cu ft).
Maximum Temperature: 1260°C (Cone 8)
Chamber dimensions: 340mm wide x380mm deep x 310mm high
External dimensions: 590mm wide x 737mm deep x 673mm high
Power: 3.0 kW
Supply required: Single Phase - 13 amps
Kiln Shelf size: 340 x 280 x 17mm See P5459 1 batt per layer
Kiln Furniture Set: See P5801 for details and price
Kiln Stand Accessory: See P5911SF for details and price
Information Link: Guide to Programming Your Kiln in PDF format
The P5901/A is a small bench mounted kiln designed for test firing clays and glazes without having to fire a large kiln.
These kilns are constructed of a lowthermal mass insulation brick with a high grade backup insulation board this is all enclosed within a high quality pressed steel powder coated frame.
Kanthal A1 spiral wound elements are used to heat the kiln, the elements are located ingrooves within the side walls of the kiln to allow uniform heat distribution throughout the chamber
All Genesis kilns are CE marked and have captive key interlocks fitted to break full load upon opening the kiln to complywith both UK and European legislation, in addition to this all Potterycrafts Genesis kilns are now fitted with two contactors as standard to give greater protection against possible over-fires, when used in conjunction with our range of microprocessor controllers.
Brick to brick door seal, no messy fibre.
This kiln is made to order please call for delivery times.
Option 1:Standard Pallet delivery by tail lift vehicle is to ground level to your driveway or kerbside; please ensure that you consider how you will move the kiln to its required operating position.
Please email firstname.lastname@example.org If you have any questions, or call us on 01782 745000 to discuss.
Click on any of the following links to download the file.