P5910/A Fireworker-ECO 50lt 1200°C
Firing capacity: 50 litres (1.77 cu ft).
Maximum Temperature: 1200°C
Chamber dimensions: 400mm wide x380mm deep x 350mm high (15” x 15” x 13”).
External dimensions: 630mm wide x 737mm deep x 760mm high (24” x 29” x30”)
Power: 3.0 kW
Supply required: Single Phase - 13 amps
Kiln Furniture Set: See P5810 for details and price
Kiln Stand Accessory: See P5911SF for details and price
Kiln Safety & Ventilation pages
Information Link: Guide to Programming Your Kiln in PDF format
Type "R" thermocouples fitted as standard on UK kilns.
The P5910/A is a small bench mounted kiln designed for test firing clays and glazes without having to fire a large kiln.
These kilns are constructed of a low thermal mass insulation brick with a high grade backup insulation board this is all enclosed within a high quality pressed steel powder coated frame.
Kanthal A1 spiral wound elements are used to heat the kiln, the elements are located in grooves within the side walls of the kiln to allow uniform heat distribution throughout the chamber
All Genesis kilns are CE marked and have captive key interlocks fitted to break full load upon opening the kiln to comply with both UK and European legislation, in addition to this all Potterycrafts Genesis kilns are now fitted with two contactors as standard to give greater protection against possible over-fires, when used in conjunction with our range of microprocessor controllers.
Brick to brick door seal, no messy fibre.
- Adjustable clasp door lock fitted.
- All kilnsare fitted with a Harting socket for easy controller connection.
- Roof bung hole and plug as standard to assist with venting of the kiln and cooling.
- Self assembly kiln stand option available with built in shelf.
- Furniture set available
All Potterycrafts kilns are ROHS and WEE complient.
This kiln is made to order please call for delivery times.
Option 1:Standard Pallet delivery by tail lift vehicle is to ground level to your driveway or kerbside; please ensure that you consider how you will move the kiln to its required operating position.
Please email email@example.com If you have any questions, or call us on 01782 745000 to discuss.
There are no downloads for this product.